Test Internet Speed

We recommend you use the Midco speed test site, because it will show you the download and upload speeds from our speed test servers to your device. This helps reduce outside influences other speed tests may introduce.

TEST SPEEDS

For best results:

• Use your computer with the fastest or most advanced hardware and software. Gigabit Ethernet cards are needed for Midco Fiber Internet 150 and higher speeds.
• Use an Ethernet networking cable to directly connect your computer to your Midco-provided optical network unit (ONU). Be sure to bypass connecting through Wi-Fi. When you perform a speed test without a wireless connection, it eliminates factors that can impact test results, such as wireless interference, and gives you the most accurate results.

While you’re testing your speeds, you can capture your results to share with us for help troubleshooting.

1. Take a screenshot of your results, or select Copy Link to copy the link to your specific speed test results.
2. Share the link or screenshot with our representatives on live chat.

If you test your speeds and are still having issues, contact us.

Here are some steps to take that may improve your speeds.

1. Check your cables and wires. Make sure your wires are all securely connected between devices.
2. Reboot your equipment, and then test your speeds again.
   • IMPORTANT: If you reboot your ONU, it will reboot all equipment and devices connected to it – including your equipment for Midco internet and phone services. As a business, we recommend you avoid reboots during busy times of day if possible.
   • If you have a wireless gateway or third-party router connected to your ONU, restart that device after the ONU is online again. You may also need to disable your firewall. While it may affect your speeds, we recommend you have a firewall in place to protect yourself while online.
   • You may also need to restart your computer or other device you’re using for the speed test.
3. Disconnect from any VPNs.
4. Turn off or disable the Wi-Fi on your computer(s), and power off your wireless gateway or third-party router. Then perform the speed test on a hard-wired device to avoid any interference.
   • If your speeds without your wireless are at or near where they should be, you may have a problem with your wireless signal. If you lease or purchased a Midco wireless gateway, contact us. If you have a third-party wireless router, refer to that manufacturer.
5. Disconnect older devices from the network and try the speed test again.
   • Older devices may not be able to reach the top speeds for your internet – and they may slow down your experience on all your devices.
6. Check your equipment. Older equipment can’t process high speeds. If you own your own router, make sure it’s on our approved modems and routers list and that your equipment has a WAN interface that can reach the speeds you want.
7. Try performing the speed test on another device.
   • If your speeds are acceptable on the different device, there may be an issue with the first device’s networking equipment, rather than an overall internet speed issue. Consult with the manufacturer of the device that had slow speeds.

If you do not have another device you can connect directly to your ONU or router, or if you still get similar slow speed test results with a different device, contact us. A Midco technician may need to visit your business to solve your internet issues. 

Wired or Wireless Signals

Wireless speeds are usually slower than wired connections, so if you run the speed test over a wireless signal, you may not reach the same speeds as a hard-wired device. Due to different types of wireless interference, Wi-Fi speeds could be up to 50% less than expected on hard-wired devices.

Wireless gateway or router placement

If you’re Wi-Fi, the location of your Midco-provided wireless gateway or third-party modem can impact your speeds.

• The further you are from the equipment, the weaker your signal will be.
• Make sure your equipment is in a centralized location.
• Placing your equipment in a cabinet or closet can create interference.
• We recommend keeping your wireless gateway or router in the open and off the floor.

FIBER ONU SUPPORT

Equipment Age

Older devices may not be able to reach the fastest speeds in your internet package. In fact, they may also slow down speeds on all devices, including brand-new laptops or smartphones.

Outdated Software

To achieve optimal speeds, make sure your device operating system and your internet browsers are up to date.

Both ping and jitter are measured in milliseconds.

Latency is the time it takes a ping (a signal or packet of information) to travel to its destination and back. A ping is actually used to measure the latency, though it’s used to refer to latency, as well. Lower latency means your signal is performing better.

Latency is influenced by:

• Your modem/router and other equipment connecting you to the internet – so DSL or dial-up modems will experience more latency than cable modems or fiber internet.
• The distance your data is traveling, meaning if you connect to a website based thousands of miles away, your latency will be higher.

Jitter is the variation in latency for information passing through a network when you perform multiple ping tests. Wired connections will always have a lower latency.

If you’re experiencing high latency, it could be caused by any of the following:

• Poor signal to a cable modem/router/ONU
• Heavy internet traffic
• Slow network routers/modems
• Other interference on the network connection

If you’re having high latency results or are experiencing unexpected jitter, check for obvious cable or networking connection damage, and confirm your connections are tight. If that doesn’t help, contact us for further troubleshooting.